Prolink Clear Epoxy Resin 1.5 Gal Kit
Prolink epoxy is a brightest white, UV stable and durable epoxy that is ideal to use on your surf, wake or paddle board project.
The epoxy is a high performance, durable system with excellent resistance to yellowing caused by UV degradation. This system can be used as a substitute for any standard epoxy system.
The system will cure at ambient temperature, but for use in thin films, allow the mixed system to sit until approximately 90° F before being spread thin. Curing at elevated temperatures or allowing long post-cures could also be used to achieve adequate working time.
Low heat of reaction
Casting and Tooling
Marine and Protective Coatings
24 months from the date of manufacture in the original sealed container at ambient temperature. Keep away from excessive heat and humidity in tightly closed containers.
Refer to the Material Safety Data Sheet PLR 23
Liquid Color (Gardner) 1 (water Clear)
Viscosity @ 77 °F (cP) 2450 and (ku)240
Part A Density @ 77°F (lb./gal) 9.7 Part B Density @ 77°F (lb./gal) 8.4
TYPICAL HANDLING PROPERTIES
Gel Time (150g mix @ 77 °F) (min) 30
Thin Film Set Time @ 77 °F (hr) 5.0
Peak Exotherm (100g mix @ 77 °F) 185 (°F)
Peak Exotherm Time (min) 40
TYPICAL PHYSICAL PROPERTIES
Tensile Strength (psi) 7,700
Tensile Modulus (thousand, psi) 500
Elongation, % 4.0
Flexural Strength (psi) 12,500
Flexural Modulus (thousand, psi) 518
Barcol Hardness 80
or 1.75 : 1 by Volume